Hours: Monday – Friday 8:30am 5:30pm MST

Can you Change your own Tires?

It’s relatively easy to change a tire, but it is critical to be safe. Learn how to change your tires properly and safely. There are many reasons why you might need to change a tire on your car. Perhaps you have a flat tire, are out of town and no one can assist you. Or maybe it is that time of year when you need to make the switch to a winter tire set, and you simply want to save money.

Can you Change your own Tires?

Owning a car comes with a lot of responsibilities. One of them is being able to change a tire by yourself. Now, we know what you’re thinking: "Why would I want to do that? That sounds difficult and dangerous! " And you are right, it can be difficult and dangerous if you don’t know what you’re doing. But the truth is, with a little knowledge and preparation, changing your tires can be a breeze. 

There are many reasons why you might need to change a tire on your car. Perhaps you have a flat tire, are out of town and no one can assist you. Or maybe it is that time of year when you need to make the switch to a winter tire set, and you simply want to save money.

Whatever the reason, it is helpful to know how to change tires by yourself. In addition to walking you through the steps of changing your tires, we’ll also give you some tips and tricks to make the process easier and safer. So, whether you’re a new driver or just want to brush up on your skills, keep reading for everything you need to know about changing tires by yourself. 

Changing tires on your own can be a daunting task, but it's a skill that can save you time and money. Here are a few tips to make the process a little less scary:

- Make sure you have the right tools. In addition to a jack and lug wrench, you'll also need a tire iron.

- Follow the car manufacturer's recommended tire rotation sequence. Not only will this help keep your tires wear even, it'll also help you remember where everything goes.

- Loosen the lug nuts before you jack up the car. This will make the process go a lot quicker once the car is in the air.

- Use the jack to raise the car until the tire is off the ground. Don't try to lift the car by the tire itself - this can damage the suspension.

- Remove the lug nuts and take the old tire off. Make sure you put the lug nuts in a safe place - you don't want to lose them.

- Install the new tire, making sure the valve stem is facing up. Replace the lug nuts and tighten them in a cross pattern.

- Lower the car to the ground and test out the new tire.

What tools will you need to change your tires?

There are a few basic tools—which can be easily found at any auto store—you will need when changing your tires. These tools can be kept in the trunk of your car so you are always prepared in case of a flat tire. You will need:

  • car jack

  • lug wrench

  • lug nut key

  • tire iron

  • the spare tire

The most important tool is the jack. The jack is what lifts your car off the ground so you can change the tire. There are two types of jacks; floor jacks and scissors jacks. Floor jacks are bigger and heavier, while scissor jacks are smaller and more portable.

The other essential tool is a wrench. This is what you use to loosen and tighten the lug nuts on your wheels. There are usually four or five lug nuts on each wheel, so make sure you have a wrench that’s long enough to fit all of them. There are many different types of lug wrenches, but the most common is the socket wrench. Some people also use a crescent wrench to help them loosen the lug nuts, but the socket wrench is generally better for this job.

The lug nut key is used to remove the lug nuts. This tool is specifically designed for this purpose and looks like a metal crowbar with a hexagonal end. Some lug nut keys also have a socket on one end that can be used with a ratchet wrench.

You will also need a tire iron to help remove the tire. It can also be used to pry off the old tire and put on the new one. 

In addition to these essential tools, you may also require:

  • a sealant or tire adhesive in case of a puncture.

  • a wire brush to remove loose rust and dirt from the wheel hub.

  • warning triangle to alert other drivers of an obstruction.

  • an air pressure gauge to check that the new tire is properly inflated.

Steps to change your tires

To change your tires, follow this simple 6-step guide:

Step 1: To start, make sure your car is parked on a level surface and that the handbrake is engaged.

Step 2: Remove the hubcap or wheel cover and loosen the lug nuts on the tire you’re changing using a lug wrench.

Step 3:  Position the jack in the designated spot under the car (usually near the wheel you are changing). Jack up your car and place the jack stand underneath the frame. 

Step 4: Remove the lug nuts completely and take off the old tire. Replace it with the new tie, making sure to line up the lug holes first. 

Step 5: Tighten the lug nuts in a star pattern, being careful not to over-tighten them. 

Step 6: Lower your car back down to the ground and give the lug nuts one final tighten. You’re good to go!

If you are feeling uncomfortable or unsure about how to do this, it is always best to consult a professional tire shop.

Always Remember

When it comes to changing your tires, there are a few things you should know before getting started.

First and foremost, you should always change your tires in a safe location. Make sure the area is flat and free from debris, and be mindful of traffic when working near the street. 

You’ll also want to make sure you have all the necessary tools for the job before you begin. This includes a lug wrench, a tire iron, and a jack. If you don’t have a lug wrench or a tire iron, you can usually rent them from your local auto store. 

If you are not comfortable changing your tires, don’t be afraid to ask for help. There is no shame in admitting that you need a hand—just make sure you have someone who knows what they are doing. 

Also, be sure to follow all of the proper safety precautions while changing your tires. This includes making sure the car is stable, using the jack correctly, and wearing protective gear.

Finally, take your time and be careful. Changing tires can be tricky, so go slowly and take your time to avoid any accidents. 

Is it safe to change tires by yourself?

With the right tools, it is absolutely safe and okay to change your tires. When you change your own tires, you know exactly what has been done to the car, and there is no question of whether the work was done correctly. You also save the money you would have spent on labor at a mechanic’s shop.

However, changing your tires can be dangerous if you do not know what you are doing. You run the risk of damaging your car or injuring yourself if you do not follow the proper procedures. Additionally, if something goes wrong while you are changing tires, you will be on your own in terms of fixing the issue. 

It is relatively simple to change a tire, but it is critical to be safe. Follow the steps outlined above, and you'll be on the road in no time.

Hours: Monday – Friday 10:30am – 7:30pm EST is a Canadian based business serving the community since 1972. We're very proud of our reputation for excellence in serving Canadians nationwide.

Get warehouse direct tires with We simplify the tire shopping experience where you can get great pricing with tires shipped to home or your preferred local Canadian installer.

We offer customers the widest selection of winter, summer, all-weather, and all-season tires. Shop warehouse direct with today!

Ezytire Toolbox